Name: Liberty Pet Door Vinyl Patio Panel
Brand: Liberty Pet Door
SKU: 01LP-B0512-1W-3SS-74.0-75.5
Price: 349.99 USD
Availability: InStock

Find The Best Pet Door Size For My Pet

Where To Install:

Door

Wall

Measure the height of your pet from the tallest point of your pet's back to the ground: inches

Measure the width of your pet from the widest part from shoulders to shoulder: inches

My pet has limited mobility. A pet who has trouble walking needs a taller pet door so that it will be easier for them to climb through.

Size & Measurement Guide x

Flap Size Flap Dimension Step Over Range Overall Panel Width Recommended Pet Height
Small 5" w x 12" h 4" 10-3/8" 9" - 16"
Medium 7" w x 16" h 4" 12-1/2" 9" - 22"
Large 9" w x 20" h 6.6" 14-1/2" 9" - 33"
Extra Large 11" w x 24" h 6.6" 16-5/8" 9" - 39"
XXL 13" w x 28" h 6.6" 18-3/8" 9" - 44"
Don't know which pet door size to get? Here is measurement guide to help you out.
Track Height Adjustment range is based on the measurement of your sliding door track height from the lowest point of your track to the highest point. Each Liberty Pet Door Panel has a 3" adjustment range. Review our Track Measuring Guide video for additional, detailed information The following standard adjustment ranges are available:
Short: 74 3⁄4" – 77 3⁄4"
Regular: 77 1⁄4" – 80 1⁄4"
Tall: 93 1⁄4" – 96 1⁄4" (additional cost)
If your measured track height does not fall within one of the ranges above, we can make a custom height! Custom height option may take up to 4 weeks to special order the glass and build the panel.

Track Measurement Guide x

In order to choose the correct panel size, you will need to measure your sliding glass door track.

Please Note: These instructions are for channel-style sliding door tracks. If you have a monorail track, these instructions do not apply.

Step 1Find the Lowest Corner of Your Track

With your sliding door open, insert one end of your measuring tape at the deepest point of the lower corner of your sliding glass door track.

Make sure the tape measure is flush to the corner. There may be a part of your door track blocking the lowest point of the corner.

Step 2Find the Highest Corner of Your Track

Line the measuring tape up the side of your doorway, stopping at the highest corner. Make sure the measuring tape is flush with the corner and is not blocked.

The distance from the lowest corner of your track to the highest corner of your track is your sliding glass door track height.

Select the Height Adjustment Range that includes your track height. Some brands have custom options if your track height does not fall into one of the ranges.

Step 3Measure Your Track Width

Using your tape measure, find the width of the bottom track your sliding glass door slides along.

Most aluminum panels require a track at least 1" wide and most vinyl panels require a track at least 1.5" wide.

Check the product details to ensure the panel will fit in your track.

How to Measure x

Step 1Locate the Lowest Corner of Your Track

With your sliding door open, insert one end of your measuring tape at the deepest point of the lower corner of your door track.

Make sure the measuring tape is flush with the lowest point of the corner and is not blocked.

Step 2Measure to the Highest Corner of Your Track

Line the measuring tape up the side of your door, stopping at the highest corner. Make sure the measuring tape is flush with the corner and is not blocked.

The distance from the lowest corner of your track to the highest corner of your track is your door track height.

Select the Custom Height Adjustment Range required for your door track height.

Step 3Measure Your Track Width

Using your measuring tape, find the width of the bottom track that your window slides along.

Make sure to check the product details to ensure the panel will fit in your track.

Product Details

Sizing & Fit

Installation Guide

FAQs

Reviews

Liberty Pet Door Vinyl Patio Panel

Small / White / 74" - 75.5" Edit

Product Details

The Liberty Pet Door Vinyl Patio Panel offers a modern solution for pet owners seeking a balance between style, functionality, and energy efficiency. This innovative pet door caters to various sliding glass door sizes thanks to its adjustable height mechanism, ensuring a perfect fit for most doorways (specify height range here).

Made with clear safety glass and insulated flaps, the Liberty Pet Door prioritizes both pet comfort and energy savings. The clear panel allows natural light to flow through while minimizing heat transfer, keeping your home comfortable and reducing energy bills.

This pet door is designed for ease of use. The spring-loaded system allows for quick and secure installation without permanent modifications to your door frame. The durable vinyl frame withstands harsh weather and energetic pets, promising long-lasting performance. A sturdy locking cover provides additional security and peace of mind.

Manufactured in the USA and backed by a 3-year warranty, the Liberty Pet Door Vinyl Patio Panel signifies a commitment to quality and customer satisfaction. This pet door is an excellent choice for pet owners who value a seamless blend of convenience, style, and security, ultimately creating a more enjoyable living environment for both pets and their humans.

Features:

Customizable for Perfect Integration: Fits into tracks at least 1-1/2" wide, with adjustable height ranges for a custom fit, blending seamlessly with your home’s aesthetics.
Optimized for Comfort: The energy-efficient glass and weather-resistant flap design keep your home comfortable and energy-efficient, regardless of the weather outside.
Easy to Clean and Maintain: The vinyl frame and safety glass are designed for easy cleaning, ensuring your pet door always looks its best.
Safe and Secure Access: Equipped with a locking cover for when you need to secure the space, without sacrificing the convenience of pet access.
Proudly Made in the USA: With a focus on quality and durability, backed by a 3-year warranty and dedicated customer support for utmost satisfaction.

Size Chart

Flap Size	Flap Dimension	Step Over Range	Overall Panel Width	Recommended Pet Height
Small	5" w x 12" h	4"	10-3/8"	9" - 16"
Medium	7" w x 16" h	4"	12-1/2"	9" - 22"
Large	9" w x 20" h	6.6"	14-1/2"	9" - 33"
Extra Large	11" w x 24" h	6.6"	16-5/8"	9" - 39"
XXL	13" w x 28" h	6.6"	18-3/8"	9" - 44"

Don't know which pet door size to get? Here is measurement guide to help you out.

Track Height Adjustment range is based on the measurement of your sliding door track height from the lowest point of your track to the highest point. Each Liberty Pet Door Panel has a 3" adjustment range. Review our Track Measuring Guide video for additional, detailed information The following standard adjustment ranges are available:

Short: 74 3⁄4" – 77 3⁄4"
Regular: 77 1⁄4" – 80 1⁄4"
Tall: 93 1⁄4" – 96 1⁄4" (additional cost)

If your measured track height does not fall within one of the ranges above, we can make a custom height! Custom height option may take up to 4 weeks to special order the glass and build the panel.

Find The Best Pet Door Size For My Pet

Pet Height: inches

Measure the height of your pet from the tallest point of your pet's back to the ground.

Pet Width: inches

Measure the width of your pet from the widest part from shoulders to shoulder.

My pet has limited mobility. A pet who has trouble walking needs a taller pet door so that it will be easier for them to climb through.

Installation Instructions

One-Piece Panel Two-Piece Panel

One-Piece Panel Installation Instructions

Difficulty Easy

Steps 08

Time Required 0.5 hours

Sections 01

Flags 01

Parts

1 Vinyl Panel Pet Door
1 Weatherstrip Seal
1 Center Post Weather Seal Draft Stopper

Tools

Flathead screwdriver
#2 Philips head screwdriver
Non-metal hammer
Scissors

Please read instructions & notes thoroughly before installation. If your panel arrived in two pieces, see our instructions for sectionals.

Step 1 Loosen Height Adjustment Locks

Loosen the height adjustment locks at the top of the panel. This allows the spring mechanism to move freely up and down.
Horizontal Cross pieces have Edge Guides on each end. Carefully remove these parts and keep them together. This will help with assembly and orientation and when reassembling the piece.

Step 2 Insert Panel Into Track

Insert the panel into the upper track of your door frame, push the panel into the spring mechanism, then swing the bottom of the panel up and over the threshold into the lower track rail.
If you can’t clear the track, try swinging in from the outside, as the outside track wall may be shorter. If the panel still doesn’t fit, see the FAQ for guidance.

Step 3 Apply Weatherstrip

Once you are confident that the panel fits, remove the panel from the track and lay it on its side on the ground.
Apply the foam weatherstrip seal by peeling back the paper and exposing the adhesive. Unroll it along the edge of the panel, pressing to ensure it adheres. Install on both sides and trim to fit with scissors.

Step 4 Place Panel In Track

Place the panel back into the sliding glass door, then tighten the height adjustment locks to lock it in place.

Step 5 Install the Draft Stopper

The center post weather seal strip (draft stopper) should be installed on the inside of the home.
It can install on either the back edge of the sliding door panel or the leading edge of the stationary panel.
This strip prevents air from leaking between the sliding glass door and the stationary panel.
Trim with scissors as needed. Clean the edge of your patio door with rubbing alcohol before installing to assure a good seal.
Repeat step two to install the panel in your track.

Sectional Panel Installation Instructions

Difficulty Easy

Steps 08

Time Required 0.5 hours

Sections 01

Flags 01

Parts

1 Vinyl Panel Pet Door
1 Weatherstrip Seal
1 Center Post Weather Seal Draft Stopper

Tools

Flathead screwdriver
#2 Philips head screwdriver
Non-metal hammer
Scissors

Please read instructions & notes thoroughly before installation. If you need to adjust the step-over height, complete steps A-C before installing the panel in your track.

Step 1 Assemble the Panel

Align the aluminum connectors extending from the bottom flap panel section with the top glass panel section.
Press the aluminum connectors into the holes at the bottom of the top glass panel section.
Ensure locking cover & height adjustment locks are on the same side!
Fasten the two panels together using the four flathead screws found in the panel packaging.

Step 2 Loosen Height Adjustment Locks

Loosen the height adjustment locks at the top of the panel. This allows the spring mechanism to move freely up and down.
Horizontal Cross pieces have Edge Guides on each end. Carefully remove these parts and keep them together. This will help with assembly and orientation and when reassembling the piece.

Step 3 Insert Panel Into Track

Insert the panel into the upper track of your door frame, push the panel into the spring mechanism, then swing the bottom of the panel up and over the threshold into the lower track rail.
If you can’t clear the track, try swinging in from the outside, as the outside track wall may be shorter. If the panel still doesn’t fit, see the FAQ for guidance.

Step 4 Apply Weatherstrip

Once you are confident that the panel fits, remove the panel from the track and lay it on its side on the ground.
Apply the foam weatherstrip seal by peeling back the paper and exposing the adhesive. Unroll it along the edge of the panel, pressing to ensure it adheres. Install on both sides and trim to fit with scissors.

Step 5 Place Panel In Track

Place the panel back into the sliding glass door, then tighten the height adjustment locks to lock it in place.

Step 6 Install the Draft Stopper

The center post weather seal strip (draft stopper) should be installed on the inside of the home.
It can install on either the back edge of the sliding door panel or the leading edge of the stationary panel.
This strip prevents air from leaking between the sliding glass door and the stationary panel.
Trim with scissors as needed. Clean the edge of your patio door with rubbing alcohol before installing to assure a good seal.
Repeat step two to install the panel in your track.

Lock Details

Since you cannot lock your sliding door to your panel pet door, we have provided you with alternative locking methods to secure your home:

Installing the sliding door clamp: This clamp has a screw that tightens by hand to prevent the sliding door from moving beyond the clamp’s placement. For doors manufactured with the glass slider on the inside track, the lock can usually be installed on the door’s raised track.

If you aren’t able to use the lock that comes with the panel: A great alternative to locking your sliding glass door is a Charley bar or dowel in the track. Both work off the same concept – they block the slider from opening. When engaged you cannot pull the sliding door away from the pet door panel.

use a charley bar or dowel in the slider track to secure your door

Other Installation Options

Semi-Permanent Installation:

You might choose to secure the panel in your track with screws. This can be done by drilling screws at an angle in the top and bottom tracks. We recommend doing this from the outside to minimize damage to the sliding glass door frame. One-way screws will prevent tampering or removal of the panel from the outside.

you can screw your panel into your slider for a more permanent installation

Stationary Panel:

Some stationary sliding door panels can be unfastened and moved over to one side so that you can install the pet door panel between the jamb and stationary panel.

Avoid damaging your sliding glass door by checking that your door can move and that you can reinstall it properly before trying to uninstall the unit.

You will still lose space in your slider to move through, however, you will be able to use your existing sliding door lock to secure your home. Installing your pet door this way is also great in that you already have an alarm system in place.

If your sliding glass door slides on the outside track, using an alternative lock might not be possible, so this allows you to still lock your door.

NOTE: You can do the stationary panel install with the regular spring actuator method – no need to screw it in.

FAQ

Will this fit my aluminum sliding glass door?

It could, but you risk condensation and an improper fit. Aluminum sliders have a narrow track, which vinyl panels may be too wide for. This is why we have the Liberty Pet Door Panel for Aluminum Sliding Glass Doors.

My flap is damaged, what should I do?

To address a damaged flap, simply obtain the Liberty Pet Door Replacement Flap for a quick and easy replacement.

How does the pet door frame adjust to temperature changes?

As temperatures decrease, the vinyl flap contracts, potentially disrupting the alignment with the frame's magnets in typical pet doors. The innovative design of the Liberty Pet Door combats this with adjustable frame magnets that extend to reconnect with the flap's magnets, ensuring a secure seal regardless of temperature fluctuations. As it warms up and the flap expands, these magnets retract accordingly.

How is the pet door safeguarded against drafts?

The combination of magnetic seals and specialized weatherstripping effectively prevents drafts from entering through the pet door.

How can I replace the flap?

Flap replacement is made effortless: simply unscrew the old flap from the adapter, then attach the new flap by screwing it into place.

Warranty

Warranty Type: Limited.

Duration: 3 years

Coverage: Defects in materials and workmanship under standard regular use.

Exclusions:

Damage caused by misuse or not using the product as intended.
Improper installation.
Damage caused by chewing.

Find The Best Pet Door Size For My Pet

Liberty Pet Door Vinyl Patio Panel

Liberty Pet Door Vinyl Patio Panel